Bookmark This web site !

Set the jumper settings on mother board as per our requirement,

• Inserted processor on socket with heat sink and cooling fan
• Inserted RAM on proper slot.
• Mounted the mother board on cabinet
• Installed CD drive, Floppy drive and Hard disk.
• Connected data cables and power cables to above mention devices
• Connected power connector to corresponding socket
• Inserted expansion card on PCI slots
• Connected the connectors of LED
• Speaker and reset to corresponding socket keeping correct polarity
• Connected peripheral devices such as key board, mouse, speaker set etc.
• Powered on the system after replacing cabinet cover.
• Set the BIOS set up.
• Partitioned the hard disk
• Installed required operating system
• Installed the driver programs for peripheral systems
• Installed the additional software required.